Warhammers (and all kinds of miniature collecting and painting hobbies) can be great. First, there is the choice of which army you want to collect. Then you have the choice of which unit you get first.
Then there's the color scheme. Did you paint it as it says on the box or something very fresh from the creative pits of your own sponge brain? If you are searching for the best quality of Warhammer 40k model games then you can have a look here.
All this before you even put the brush on the plastic. The painting process itself can feel even more dangerous, each step is filled with possible application techniques, each with several stages, each with a different level of difficulty, and on and on.
There are lots of tips on what to do online, but it's often not difficult to get lost and forget the big picture: painting is about what you can do, not what you have to do. There really isn't one right answer – just personal preference learned through experience with your own model.
With that in mind, this is a comprehensive guide that offers parade-ready miniature drawing marathons.
Creating highly detailed thumbnails is very satisfying and all the stages are easier to master than you might think.
Table top war gamers are pretty hard on their miniatures. Between transportation to and from tournaments and actually playing with the models, there’s continually strong opportunity to damage the models. One of the most common damages is breaking glue joints – arms, legs, weapons, heads, and various accessories get broken off all the time.
The basic process is to drill holes in two pieces you want to join, insert the appropriate length of the pin into the hole, and then glue. This is a very valuable technique that works great for any Army Warhammer, both 40k and Fantasy. The process is very simple:
Step 1: Select a drill and pinched the bridge. It is necessary to provide a snug fit.
Step 2: Drill a hole into the first cut. It may have become a smaller part, as you will attach the arm to the torso.
Step 3: Insert clamping rod into the hole. Taking the entire length of the rod and insert it into the hole you have made.
Step 4: Trim the stem clamp around 3mm or 3/16 “. With the rod sticking out of the holes have been drilled, cut down so a little short stem still sticking out.
Step 5: Mark the position of the second hole using the paint on the pin. This is the second secret to clamp. Line up the holes can be challenging.