Table top war gamers are pretty hard on their miniatures. Between transportation to and from tournaments and actually playing with the models, there's continually strong opportunity to damage the models. One of the most common damages is breaking glue joints – arms, legs, weapons, heads, and various accessories get broken off all the time.

Pinning is a technique you can use to make very strong joints and to better mount your Warhammer figures to their bases. You can also purchase new Warhammer 40k games online via https://tistaminis.com/pages/games-workshop-homepage.

The basic process is to drill holes in two pieces you want to join, insert the appropriate length of the pin into the hole, and then glue. This is a very valuable technique that works great for any Army Warhammer, both 40k and Fantasy. The process is very simple:

Step 1: Select a drill and pinched the bridge. It is necessary to provide a snug fit.

Step 2: Drill a hole into the first cut. It may have become a smaller part, as you will attach the arm to the torso.

Step 3: Insert clamping rod into the hole. Taking the entire length of the rod and insert it into the hole you have made.

Step 4: Trim the stem clamp around 3mm or 3/16 ". With the rod sticking out of the holes have been drilled, cut down so a little short stem still sticking out.

Step 5: Mark the position of the second hole using the paint on the pin. This is the second secret to clamp. Line up the holes can be challenging.